Harman P61A

Harman P61A Pellet Stove
Discover The Powerful Difference Of A Harman

The Harman P61A Pellet Stove relie on state-of-the-art technology to automatically adjust themselves to your desired room temperature. Simply pour your pellets into the convenient top-loading hopper and set the temperature dial on your P61A. If the room is much cooler than the set temperature, the P61A will produce a large fire in order to quickly reach the desired temperature. If only a slight increase is needed, the P61A will burn a small fire. This way, no energy is wasted by overshooting your predetermined temperature level.

In addition to adjusting temperature levels, the P61A will automatically adjust themselves for fuel quality. An ESP (Exhaust Sensing Probe) analyzes the output of the fuel being burned and adjusts the feed rate accordingly to increase fuel quality.

The P61 models have the widest heating range of any pellet stove. The P61A can burn any brand of wood pellet regardless of the ash content. This allows you to buy lower cost pellets and achieve the same results for less.

The P61A’s high efficiency allows you to burn less fuel to heat the same area as the competitor’s stoves. Since the stove adjusts automatically to produce the correct amount of heat, it is the best choice even if you never need 61,000 BTUs. Ash removal is quick, easy, and can be done while the stove is in operation. Normally ashes need only be removed every one to two months.

To perform annual cleaning, simply unlatch and remove the blower cover located behind the ash pan. Now the venting system can be easily cleaned with a vacuum cleaner and brush.

ESP Control
Room Sensor
Patented Feeder
Patented Burn Pot
Large Ash Pan
Swing Open Ash Door
Accordion Heat Exchanger
Air-Cooled Combustion Blower
Super Easy Cleaning
More than 100 Square Inches Of Glass
P61A Automatic Ignition

Side Heat Shields
Hopper Extension
Ceramic Log Set For a Wood Fire Look
Tile Pack
Gold Door
Gold Air Grill

Fuel: Bio-Mass Pellets
BTU Range: 0 to 61,000
Heating Capacity: 2,000+ sq ft
Hopper Capacity: 72 lbs
Blower Size: 135 cfm
Flue Size: 3 inches
Outside Air Size: 2-3/8 inches
Fuse Rating: 5 amp
Weight: 249 lbs
Depth: 29-1/2 inches
Height: 34-1/2 inches
Width: 23-1/2 inches
Testing: Safety Testing
(by Warnock Hersey)
ASTM E1509
Mobile Home-Approved